PE hot-melt pipe fittings are the fittings that connect PE pipes by hot-melt method. Their function is to connect pipes. When they are used, they should be connected by hot-melt method. As a kind of fittings used to connect pipes, considering that the application has high requirements on the tightness of the pipeline system, and there should be no leakage problem, we should remind everyone to pay attention to the installation of pipe fittings and optimize the welding effect.

As for the welding operation of PE hot-melt pipe fittings, we need to prepare the construction drawing first. After ensuring that there is no problem in the construction drawing, we can start the welding operation under the condition that the hardware and technology are fully prepared.

Among them, the construction preparation before welding PE hot-melt pipe fittings is to prepare the construction drawings first, because the construction is carried out according to the design drawings. Without the drawings, there is no basis for the construction. If there are problems in the drawings, it is easy to make mistakes in the construction. As for the preparation of construction drawings, we should pay attention to the fact that only after the effective construction drawings are produced by the design unit can the construction unit go to the site for construction. Before construction, we should have a specific understanding of the situation. For the parts that cannot be constructed according to the drawings, we should disclose and negotiate with the design unit to determine whether special construction techniques can be adopted or local design changes can be made.

At the same time, in the preparation of construction drawings, the construction unit should also pay attention to the procurement of materials and equipment according to the drawings, and arrange the construction schedule, so as to carry out PE hot-melt pipe welding operation, and the specific work performance will be very good.