Any construction is required, there are many matters and points to pay attention to, we need to pay full attention to these, in the relevant aspects of optimization, in order to do a good job in the construction. For example, when you install PE hot-melt pipe fittings, you need to pay attention to the following points to ensure good performance in these aspects and good guarantee in the final construction effect:

Key point 1: when installing PE hot-melt pipe fittings, it is necessary to confirm that the hot-melt equipment can only be operated after reaching the set working temperature, so as to ensure the heating effect. Otherwise, the equipment temperature is not enough, the heating effect is not good, it is impossible to ensure the connection effect, and the connection is not tight and firm.

Key point 2: when installing PE hot-melt pipe fittings, it is necessary to pay attention to the straight, neat and clean pipe end cutting, otherwise it will not only affect the connection operation, increase the difficulty of connection, but also affect the connection effect, increase the probability of leakage at the connection, thus causing great adverse impact on the use of the pipeline.

Key point 3: when installing PE hot-melt pipe fittings, it is necessary to ensure that the socket reaches the marked depth, and at the same time, it is necessary to pay attention to the non rotation in the process of connection, and the welding heating time, temperature, pressure, pressure maintaining and cooling time must meet the requirements, so as to ensure the best connection effect and the very firm connection of the whole pipeline system.